mt25 tyre pressureMT-25 Tyre Pressure

The recommended tire pressure for the Yamaha MT-25 depends on whether you are riding alone or with a pillion. The following tire pressure levels are recommended.

MT25 Tyre Pressure Front and Back with Pillion and without Pillion

  • Front tire:
    • Solo: 210 kPa (30 psi)
    • With pillion: 220 kPa (32 psi)
  • Rear tire:
    • Solo: 240 kPa (35 psi)
    • With pillion: 260 kPa (38 psi)

Benefits of using nitrogen air in MT 25 tires

Benefits of using nitrogen air

Nitrogen air is a relatively new alternative to regular air for inflating tires. It offers several benefits, including:

  • Slower pressure loss: Nitrogen molecules are larger than oxygen molecules, so they escape from the tire at a slower rate. This means that your tires will lose pressure more slowly if they are inflated with nitrogen air.
  • Improved fuel efficiency: Nitrogen air can help to improve fuel efficiency by reducing the rolling resistance of the tires.
  • Reduced corrosion: Nitrogen air is less reactive than oxygen, so it can help to reduce corrosion of the tire’s inner liner.
  • Reduced risk of tire failure: Nitrogen air can help to reduce the risk of tire failure by maintaining consistent pressure levels.

Disadvantages of using nitrogen air in tires

There are a few disadvantages to using nitrogen air in tires, including:

  • Cost: Nitrogen air is typically more expensive than regular air.
  • Availability: Nitrogen air is not as widely available as regular air.
  • Special equipment: Nitrogen air requires special equipment to inflate tires.

How to maintain in mt25 tyre pressure

It is important to check your tire pressure regularly, especially before each ride. You can check your tire pressure with a tire gauge. If the tire pressure is too low, inflate the tire using a tire pump. If the tire pressure is too high, release air from the tire using the valve stem depressor tool on the tire gauge.

Additional tips for maintaining tire pressure

  • Check tire pressure when the tires are cold, as tire pressure increases with temperature.
  • Avoid checking tire pressure immediately after riding, as the tires will be hot and the pressure reading will be inaccurate.
  • Use a tire pressure gauge that is accurate and in good condition.
  • Inflate the tires to the recommended pressure level, not exceeding the maximum recommended pressure.
  • Check the tire pressure for any leaks regularly.
  • Replace the tires if they are worn or damaged.

By following these tire pressure guidelines and maintaining proper tire care, you can ensure the optimal performance, safety, and longevity of your Yamaha MT-25.

Related Post

Leave a Reply

Your email address will not be published. Required fields are marked *